Lonking 14ton / 0.6 M3 Small Hydraulic Excavator with Cummins Engine
CDM6150with strong, powerful and high quality engine and advanced negative flow control hydraulic system to achieve the best power matching and minimum costand guarantee the optimum working efficiency.
CDM6150 is widely used forexcavating, handling and finishing of earth or stones to meet the demand of construction sites, factory, municipal engineering and park objects etc. with the optional breaking hammer, the building demolition, road surface repair and rock breaking can be achieved.
Cummins Engine
The original Cummins high power, high torque and turbo-charging 4-cylinder direct injection engine guarantees the high reliability and durability. The air-air inter cooler system over the compressed air can enhance the oxygen content upon combustion markedly. The center fuel injection under high injection pressure allows the uniform atomizing of fuel, guarantees the normal combustion and reduces the exhaust emission. And the engine conforming to Euro IIIA emission standard is optional.
Filtering System
The high efficiency dual element air filter ensures the quality of engine air intake. In addition, the air pre-filter can carry out the rough filtration over the air intake to enable the operation under the high dust concentration working conditions and prolong the maintenance interval of the air filter. The oil-water separator and two-stage fuel filter will filtrate the fuel many times to ensure the quality of fuel fed to the engine.
Cooling System
The parallel radiator makes cooling effect better and service easier.
Maintenance and Service
The easy maintenance of direct injection engine reduces the cost of maintenance. The global after service of engine enables the sharing of global resources. This will enhance the service efficiency, relieve the customers' worry and ensure the attendance rate of excavator.
Specialist of Engine Management
The engine speed allows 10 adjustable gears through the throttle potentiometer and achieves the precise management over the engine speed through the control of engine throttle by the DC servo motor. The engine allows the auto idling/acceleration function to reduce the fuel consumption. It has a function of touch power enhancement, can handle the high resistance working condition with ease.
Control Mode
Adopt negative flow control system or dual-pump double-circuit constant power control system. Adopt boom holding system and swing cushion valve control.
Functions
This machine is equipped with the functions of straight travel, boom/arm confluence, boom/arm holding, swing priority, swing anti-reversing and regeneration of arm cylinder. Each return circuit without interference during composite action. Digging of arm and bucket as well as the lifting and swing of boom at the same time during operating, the operations of left and right motors are independent during traveling.
Auxiliary Hydraulic Valve
The main valve is provided with a set of standby valves to facilitate the installation of other accessories such as the breaking hammer.
Filtering System
The hydraulic circuit is equipped with the high quality hydraulic oil filter which can prolong the service life of the hydraulic elements.
Components Layout
The special design of hydraulic system and components location can enhance the system efficiency of the machine. The hydraulic oil tank, main pump and main valve are arranged closely to shorten the connecting lines and consequently reduce the line friction and pressure drop. The radiator is arranged at the right side behind the cab to effectively reduce the noise, hot air and exhaust received by the operator.
Pilot System
The pilot pump is independent from main pump and supply oil to the pilot system which guarantee the stable and independent of pilot control and facilitate the maintenance.
Monitor
The multi-purpose true color monitor allows the real-time monitoring and display of machine state, engine speed, coolant temperature, oil pressure and fuel level etc.
Power Control Mode
3 power modes of heavy-duty power mode (H mode), saving power mode (S mode) and light-duty power mode (L mode) can switch at will to reduce the power loss. The combination of 3 modes can reduce the fuel consumption and better meet the different working conditions.
Specifications |
CDM6150 |
Engine |
Model |
Cummins4BTAA3.9-C |
CumminsQSB4.5 |
Rated power |
86 kW (117hp) /2200 rpm |
90 kW (122hp) /2200 rpm |
Max. torque |
424 N.m/1600 rpm |
489 N.m/1500 rpm |
Bore× Stroke |
102mm×120mm |
107 mm×124 mm |
Displacement |
3.9 L |
4.5 L |
Comment |
Maintain the rated power at 2300m elevation. |
Operating weight |
Summary |
Operating weight:14000kg The operating weight includes the weight of 4600 mm standard boom, 2500 mm standard arm,0.56m3 standard bucket, 500 mm track shoes,lubricating oil, coolant, the full diesel oil tank and the rest standard configuration units.. |
Ground pressure |
45 kPa |
Fluid capacity |
Fuel tank |
270 L |
Cooling system |
23 L |
Engine oil |
14 L |
Swing drive unit |
1.8 L |
Traveling gear |
2×2.5 L |
Hydraulic oil tank |
159 L |
Swing mechanism |
Summary |
High torque plunger motor and 2-stage planetary reducer drive. Brake inside loading motor is applied by spring and released by hydraulic unit. The automatic braking is available when the swing control lever is in neutral position. |
Swing speed |
11.9 rpm |
Travel drive |
Summary |
The integrated 2-speed plunger hydraulic motor and reducer drive, motor and hydraulic pipeline are arranged inside the track frame to prevent the damage caused by the rugged road surface. The motor inside is provided with the service brake and shock absorption valve to ensure the smooth running and stop and the reliable braking. |
Taveling speed |
3.34 -5.5 km/h |
Gradeability |
35°(70%) |
MaximumTraction |
113 kN |
Traveling mechanism |
Standard track shoe width |
500 mm |
No. of track shoe |
43 (each side) |
No. of carrierrollers |
2 (each side) |
No. of track rollers |
7 (each side) |
Hydraulic system |
Main pump |
Duplex axial variable plunger pump |
Pilot pump |
gear pump (integrated in main pump) |
Max. flow of system |
2×120 L/min |
Max. pressure of equipment |
34.3 MPa |
Max. pilot pressure |
3.9 MPa |
Operating equipment |
Each machine action is under the pilot control. The right lever controls the motion of boom and bucket while the left lever controls the arm motion and upper structure swing. The foot pilot valve is provided with the lever joystick to control the machine traveling or turning by the foot or lever. The traveling gear shift adopts the solenoid switch control. |
Electrical system |
System voltage:24 V Battery:12 V,120 A×2 |
Q: How can we trust your company?
A: We are the officially authorized 4S dealer and distributor of some famous brands such as SINOTRUK, LONKING and
VOLVO. And we are registered in the Commercial Department of China, with the whole qualification for exporting.
Certificates including ISO9001 can also be provided.
Q: How about your warranty item?
A: We can support you with original spare parts, and email or telephone assistance in the following days. If necessary, our
experienced engineer can go abroad to your place for technical support.
Q: How about your product quality?
A: All our products are from the original manufacturers and the quality is 100% guaranteed.
Q:Can I be your agent in my country ?
A: It's OK if the order quantity is appropriate. We looks forward to long-term cooperation.
For more information about products, please do not hesitate to contact with us.
Qinling Motors Limited
*Fullwon Group*
One stop Solution provider!
MORE PRODUCTS OPTIONS: